| Length | 59.84" | Width | 7.09" |
| Thickness | 8mm | Wear Layer | 20mil |
| Finish | EIR | Edge Description | Natural Bevel |
| Sqft/Box | 23.56 | lb/Box | 36.1 |
| Box/Plt | 65 | Sqft/Plt | 1531 |
| lb/Plt | 2345 | Plt/FTL | 18 |
| Limited Residential Warranty |
Lifetime | Limited Commercial Warranty |
15Years |
| Characteristics | Standards | Requirements | Result |
| TUV Premium Certification |
Belgian VOC regulation BREEAM Exemplary Level |
Refer to Standards | Pass |
| CE Certification | EN14041 | Refer to Standards | Pass |
| Floorscore Certification |
SCS-EC10.3-2014v3.0 | Refer to Standards | Pass |
| Castor Chair Resistance | NALFA LF 01-2011 Section 3.9 | N/A | After 25000 cycles,test specimens no visible damage |
| Dimensional Stability | ASTM F2199-09(2014) Heating temperature:65oC |
≤0.25% | MD:=-0.092% AMD:=-0.030% |
| Pentachlorophenol(PCP) | With reference to PD CEN/TR 14823:2003 |
N/A | Free |
| Formaldehyde Emission | EN 717-1:2004 | E1≤0.124mg/m³ | Free |
| Fire resistance | EN ISO 9239-1 EN ISO 11925-2 EN 13501-1:2010 |
N/A | Bfl-S2 |
| Impact insulation | ASTM E2179-09 | N/A | IICC-28=∆IIC 24 |
| Impact resistance | ASTM F1265-03a(2013) | N/A | No crack |
| Phthalate tests (DBP/BBP/DEHP/DINP/ DNOP/DIDP) |
REACH NO.1907/2006 | N/A | Free |
| Resistance to Heat | ASTM F1514-03(2013) | △E* shall not greater than 8.0 after7 days exposure to 70°C | △E*=0.66 |
| Residual indentation | ASTM F1914-07(2011) | Average≤8% Max≤10% | Average≤6.6% Max≤7.4% |
| Slip resistance | EN 13893:2003 | EN 14041:μ≥0.3 | μ=0.36 Class DS |
| Density | ASTM D792-13 Method A,Water at 23°C | N/A | 1.15g/cm³ |
| Squareness | ASTM F2055-17 | ≤0.25mm/305mm | Pass |
| Size | ASTM F2055-17 | A tolerance of ±0.4mm/305mm | Pass |
| Thickness | ASTM F386-17 | A tolerance of ±0.13mm | Pass |
| Thermal Conductivity | ASTM C518-10 | N/A | 0.114 W/(m.K) |
| Thermal Resistance | ASTM C518-10 | N/A | 0.062(m².K)/W |